bdfproxy dependency error

ehsan
New Member

Posts: 27

bdfproxy dependency error Oct 4, 2016 22:06:17 GMT

Quote

Post by ehsan on Oct 4, 2016 22:06:17 GMT

Hello

there are some errors while installing bdfproxy module


installing mitmproxy...

Reading package lists... Done

Building dependency tree
.
. [Deleted some logs]
.
Reading state information... Done

Package gcc-multilib is not available, but is referred to by another package.

This may mean that the package is missing, has been obsoleted, or

is only available from another source



E: Unable to locate package gcc-4.9-multilib

E: Couldn't find any package by glob 'gcc-4.9-multilib'

E: Couldn't find any package by regex 'gcc-4.9-multilib'

E: Package 'gcc-multilib' has no installation candidate

E: Unable to locate package lib32asan1

E: Unable to locate package lib32atomic1

E: Unable to locate package lib32cilkrts5

E: Unable to locate package lib32gcc-4.9-dev

E: Couldn't find any package by glob 'lib32gcc-4.9-dev'

E: Couldn't find any package by regex 'lib32gcc-4.9-dev'

E: Unable to locate package lib32gcc1

E: Unable to locate package lib32gomp1

E: Unable to locate package lib32itm1

Reading package lists... Done

Building dependency tree

Reading state information... Done

E: Unable to locate package lib32quadmath0

E: Unable to locate package lib32stdc++6

E: Couldn't find any package by regex 'lib32stdc++6'

E: Unable to locate package lib32ubsan0

E: Unable to locate package libc6-dev-x32

E: Unable to locate package libc6-i386

E: Unable to locate package libc6-x32

E: Unable to locate package libx32asan1

E: Unable to locate package libx32atomic1

E: Unable to locate package libx32cilkrts5

E: Unable to locate package libx32gcc-4.9-dev

E: Couldn't find any package by glob 'libx32gcc-4.9-dev'

E: Couldn't find any package by regex 'libx32gcc-4.9-dev'

Reading package lists... Done

Building dependency tree

Reading state information... Done

E: Unable to locate package libx32gcc1

E: Unable to locate package libx32gomp1

E: Unable to locate package libx32itm1

E: Unable to locate package libx32quadmath0

E: Unable to locate package libx32ubsan0

.

. [Deleted some logs]

.


  Running setup.py bdist_wheel for Pillow ... error

  Complete output from command /usr/bin/python -u -c "import setuptools, tokenize;__file__='/tmp/pip-build-3SEkw0/Pillow/setup.py';exec(compile(getattr(tokenize, 'open', open)(__file__).read().replace('\r\n', '\n'), __file__, 'exec'))" bdist_wheel -d /tmp/tmpxurq5Rpip-wheel- --python-tag cp27:

  running bdist_wheel

  running build

.

. [Deleted some logs]

.

  writing dependency_links to Pillow.egg-info/dependency_links.txt

  warning: manifest_maker: standard file '-c' not found



  reading manifest file 'Pillow.egg-info/SOURCES.txt'

  reading manifest template 'MANIFEST.in'

  warning: no files found matching '*.sh'

  no previously-included directories found matching 'docs/_static'

  warning: no previously-included files found matching '.coveragerc'

  warning: no previously-included files found matching '.editorconfig'

  warning: no previously-included files found matching '.landscape.yaml'

  warning: no previously-included files found matching 'appveyor.yml'

  warning: no previously-included files found matching 'build_children.sh'

  warning: no previously-included files found matching 'tox.ini'

  warning: no previously-included files matching '.git*' found anywhere in distribution

  warning: no previously-included files matching '*.pyc' found anywhere in distribution

  warning: no previously-included files matching '*.so' found anywhere in distribution

  writing manifest file 'Pillow.egg-info/SOURCES.txt'

  copying PIL/OleFileIO-README.md -> build/lib.linux-armv7l-2.7/PIL

  running build_ext

  Traceback (most recent call last):

    File "<string>", line 1, in <module>

    File "/tmp/pip-build-3SEkw0/Pillow/setup.py", line 767, in <module>

      zip_safe=not debug_build(), )

    File "/usr/lib/python2.7/distutils/core.py", line 151, in setup

      dist.run_commands()

    File "/usr/lib/python2.7/distutils/dist.py", line 953, in run_commands

      self.run_command(cmd)

    File "/usr/lib/python2.7/distutils/dist.py", line 972, in run_command

      cmd_obj.run()

    File "/usr/lib/python2.7/dist-packages/wheel/bdist_wheel.py", line 175, in run

      self.run_command('build')

    File "/usr/lib/python2.7/distutils/cmd.py", line 326, in run_command

      self.distribution.run_command(command)

    File "/usr/lib/python2.7/distutils/dist.py", line 972, in run_command

      cmd_obj.run()

    File "/usr/lib/python2.7/distutils/command/build.py", line 128, in run

      self.run_command(cmd_name)

    File "/usr/lib/python2.7/distutils/cmd.py", line 326, in run_command

      self.distribution.run_command(command)

    File "/usr/lib/python2.7/distutils/dist.py", line 972, in run_command

      cmd_obj.run()

    File "/usr/lib/python2.7/distutils/command/build_ext.py", line 337, in run

      self.build_extensions()

    File "/tmp/pip-build-3SEkw0/Pillow/setup.py", line 512, in build_extensions

      ' using --disable-%s, aborting' % (f, f))

  ValueError: jpeg is required unless explicitly disabled using --disable-jpeg, aborting



  ----------------------------------------

  Failed building wheel for Pillow

  Running setup.py clean for Pillow

  Running setup.py bdist_wheel for construct ... done

.

. [Deleted some logs]

.

Successfully built urwid blinker tornado lxml html2text cryptography pyperclip configargparse backports.ssl-match-hostname construct watchdog click cffi PyYAML pathtools pycparser

Failed to build Pillow

Installing collected packages: hpack, hyperframe, enum34, h2, passlib, urwid, blinker, idna, pyasn1, setuptools, ipaddress, pycparser, cffi, cryptography, pyOpenSSL, backports.ssl-match-hostname, singledispatch, certifi, backports-abc, tornado, pyparsing, lxml, html2text, pyperclip, configargparse, requests, Pillow, construct, PyYAML, argh, pathtools, watchdog, click, mitmproxy

  Found existing installation: blinker 1.3

    DEPRECATION: Uninstalling a distutils installed project (blinker) has been deprecated and will be removed in a future version. This is due to the fact that uninstalling a distutils project will only partially uninstall the project.

    Uninstalling blinker-1.3:

      Successfully uninstalled blinker-1.3

.

. [Deleted some logs]

.


  Running setup.py install for Pillow ... error

    Complete output from command /usr/bin/python -u -c "import setuptools, tokenize;__file__='/tmp/pip-build-3SEkw0/Pillow/setup.py';exec(compile(getattr(tokenize, 'open', open)(__file__).read().replace('\r\n', '\n'), __file__, 'exec'))" install --record /tmp/pip-MeCQqA-record/install-record.txt --single-version-externally-managed --compile:

    running install

    running build

    running build_py

.

. [Deleted some logs]

.

    writing manifest file 'Pillow.egg-info/SOURCES.txt'

    copying PIL/OleFileIO-README.md -> build/lib.linux-armv7l-2.7/PIL

    running build_ext

    Traceback (most recent call last):

      File "<string>", line 1, in <module>

      File "/tmp/pip-build-3SEkw0/Pillow/setup.py", line 767, in <module>

        zip_safe=not debug_build(), )

      File "/usr/lib/python2.7/distutils/core.py", line 151, in setup

        dist.run_commands()

      File "/usr/lib/python2.7/distutils/dist.py", line 953, in run_commands

        self.run_command(cmd)

      File "/usr/lib/python2.7/distutils/dist.py", line 972, in run_command

        cmd_obj.run()

      File "/usr/local/lib/python2.7/dist-packages/setuptools/command/install.py", line 61, in run

        return orig.install.run(self)

      File "/usr/lib/python2.7/distutils/command/install.py", line 601, in run

        self.run_command('build')

      File "/usr/lib/python2.7/distutils/cmd.py", line 326, in run_command

        self.distribution.run_command(command)

      File "/usr/lib/python2.7/distutils/dist.py", line 972, in run_command

        cmd_obj.run()

      File "/usr/lib/python2.7/distutils/command/build.py", line 128, in run

        self.run_command(cmd_name)

      File "/usr/lib/python2.7/distutils/cmd.py", line 326, in run_command

        self.distribution.run_command(command)

      File "/usr/lib/python2.7/distutils/dist.py", line 972, in run_command

        cmd_obj.run()

      File "/usr/lib/python2.7/distutils/command/build_ext.py", line 337, in run

        self.build_extensions()

      File "/tmp/pip-build-3SEkw0/Pillow/setup.py", line 512, in build_extensions

        ' using --disable-%s, aborting' % (f, f))

    ValueError: jpeg is required unless explicitly disabled using --disable-jpeg, aborting



    ----------------------------------------

  Rolling back uninstall of Pillow

Command "/usr/bin/python -u -c "import setuptools, tokenize;__file__='/tmp/pip-build-3SEkw0/Pillow/setup.py';exec(compile(getattr(tokenize, 'open', open)(__file__).read().replace('\r\n', '\n'), __file__, 'exec'))" install --record /tmp/pip-MeCQqA-record/install-record.txt --single-version-externally-managed --compile" failed with error code 1 in /tmp/pip-build-3SEkw0/Pillow/

installing bdfproxy...

Cloning into 'bdf-proxy'...

.

. [Deleted some logs]

.


make  all-am

make[1]: Entering directory '/usr/share/fruitywifi/www/modules/bdfproxy/includes/bdf-proxy/bdf/osslsigncode'

gcc -DHAVE_CONFIG_H -I.       -g -O2 -MT osslsigncode.o -MD -MP -MF .deps/osslsigncode.Tpo -c -o osslsigncode.o osslsigncode.c

mv -f .deps/osslsigncode.Tpo .deps/osslsigncode.Po

gcc    -g -O2   -o osslsigncode osslsigncode.o  -lcrypto  -lcurl

make[1]: Leaving directory '/usr/share/fruitywifi/www/modules/bdfproxy/includes/bdf-proxy/bdf/osslsigncode'

make[1]: Entering directory '/usr/share/fruitywifi/www/modules/bdfproxy/includes/bdf-proxy/bdf/osslsigncode'

 /bin/mkdir -p '/usr/local/bin'

  /usr/bin/install -c osslsigncode '/usr/local/bin'

make[1]: Nothing to be done for 'install-data-am'.

make[1]: Leaving directory '/usr/share/fruitywifi/www/modules/bdfproxy/includes/bdf-proxy/bdf/osslsigncode'

[!!!!] Arm not supported for aPLib

.

. [Deleted some logs]

.


 /bin/mkdir -p '/usr/local/bin'

  /usr/bin/install -c osslsigncode '/usr/local/bin'

make[1]: Nothing to be done for 'install-data-am'.

make[1]: Leaving directory '/usr/share/fruitywifi/www/modules/bdfproxy/includes/bdf-proxy/bdf/osslsigncode'

[!!!!] Arm not supported for aPLib

patching bdfproxy config...

patching file bdf-proxy/bdfproxy.cfg

patching file bdf-proxy/bdf_proxy.py

..DONE..

Last Edit: Oct 5, 2016 9:02:37 GMT by ehsan

xtr4nge
Administrator

Posts: 362

bdfproxy dependency error Oct 6, 2016 8:03:36 GMT

Quote

Post by xtr4nge on Oct 6, 2016 8:03:36 GMT

Hi ehsan
bdfproxy is tricky because it requires several dependencies. Try replacing install.sh (on bdfproxy module includes folder) with the following content:

#!/bin/bash

echo "installing mitmproxy..."

apt-get -y install python-pip python-configobj git
apt-get -y install build-essential python-dev libffi-dev libssl-dev libxml2-dev libxslt1-dev python-capstone

apt-get -y install gcc-4.9-multilib gcc-multilib lib32asan1 lib32atomic1 lib32cilkrts5 lib32gcc-4.9-dev lib32gcc1 lib32gomp1 lib32itm1 
apt-get -y install lib32quadmath0 lib32stdc++6 lib32ubsan0 libx32asan1 libx32atomic1 libx32cilkrts5 libx32gcc-4.9-dev
apt-get -y install libx32gcc1 libx32gomp1 libx32itm1 libx32quadmath0 libx32ubsan0

# LIBC6
apt-get -y install libc6-dev-x32 libc6-i386 libc6-x32

# UPGRADE PIP
python -m pip install -U pip

pip install --upgrade six

apt-get -y install libjpeg-dev
pip install --upgrade Pillow

apt-get -y remove python-cffi
pip install --upgrade cffi

pip install mitmproxy

echo "installing bdfproxy..."

git clone https://github.com/xtr4nge/BDFProxy bdf-proxy/

git clone https://github.com/xtr4nge/the-backdoor-factory bdf-proxy/bdf/

cd bdf-proxy/bdf/
./install.sh
cd ..
./install.sh
cd ..

echo "patching bdfproxy config..."

patch bdf-proxy/bdfproxy.cfg < patch/bdfproxy.cfg.patch
patch bdf-proxy/bdf_proxy.py < patch/bdf_proxy.py.patch

echo "..DONE.."
exit

Last Edit: Oct 6, 2016 8:06:08 GMT by xtr4nge

@xtr4nge

alexl83 New Member Posts: 13	bdfproxy dependency error Mar 12, 2017 13:24:02 GMT Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by alexl83 on Mar 12, 2017 13:24:02 GMT Cannot install bdfproxy either; complaining about gcc-multilib not being available, no package available for lib32gcc-4.9-dev, and python complaining about 'ImportError: cannot import name IncompleteRead'

xtr4nge
Administrator

Posts: 362

bdfproxy dependency error Mar 25, 2017 14:42:28 GMT

Quote

Post by xtr4nge on Mar 25, 2017 14:42:28 GMT

Hi guys, mitmproxy has been updated several times since my last updated for FruityProxy and BDFproxy ( both uses mitmproxy )
I will try to do an updated on the modules as soon as possible to solve the compatibility and dependencies issues.

regards,

@xtr4nge

bdfproxy dependency error

Post by ehsan on Oct 4, 2016 22:06:17 GMT

Post by xtr4nge on Oct 6, 2016 8:03:36 GMT

Post by alexl83 on Mar 12, 2017 13:24:02 GMT

Post by xtr4nge on Mar 25, 2017 14:42:28 GMT